TAm218 - Swivel-tilt platform for equipment
Technical Details:
Is designed for mounting flat objects and equipment with a flat base. It can be used for connection of two Fs219 mounts and creation of the design with a remote mount. The plate diameter is 63 mm. It is connected with the adapter by an M6*60 DIN 912 screw and an M6 DIN 985 self-locking nut. The design allows the plate to be 360° rotated around the axis in relation to the adapter. The assembly also includes four WS M6*16 screws and four M6 DIN 934 nuts. The tilt joint with 27.7° splines is equipped with Dp230 7.5° washers and a spring. The tilt is adjusted and fixed by an M6*55 DIN 933 bolt and a hex-knob with an inserted M6 DIN 934 nut. The design comprises a male adapter shaped as a 12 pointed star, which is used for fixing the structure on the vessel. The main parts are made of fiberglass-reinforced polyamide. Fasteners — of A2 (AISI 304) stainless steel (except for the M6 DIN 934 brass nut).
| Category: | Borika Fasten |
|---|
Product description:
- The round mounting pad has 63 mm in diameter and is suitable for mounting equipment with a flat base and other flat objects (for example, tool boxes). The design comprises the tilt joint for adjusting the position of the mounted equipment.
- Can be installed in any BORIKA FASTen® mounting system or mount, and using conversion adapters — in the mounting systems from other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).
- The plate with the fastened equipment can be fully rotated without having to remove the adapter from the mount.
Materials: fiberglass-reinforced polyamide, A2 (AISI 304) stainless steel, brass.
In the package: a TAm218 plate, four WS M6*16 flat-head screws and four M6 DIN 934 nuts.
Tips on using & installation:
- To fasten objects to the plate, use fasteners provided in the package.
- The 27.7° splines of the tilt joint allow the design to be equipped with different extenders and 7.5° adapter washers, which provide precise adjustment of the tilt position. The chosen tilt position is secured by screwing the knob nut. After fishing, the structure can be easily removed from the mount without dismantling the equipment or other secured objects.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
