STm300 - Fish finder transducer arm mount (L — 300 mm) with the kit for installation on a transom (Ft300 + FMb)
Technical Details:
It has been designed for installation of the transducer arm mount at a distance of 300 mm from the mounting point on the transom. The design includes the Ft300 transducer and the FMb mounting system. The design of the transducer consists of the transducer mount with an M6*50 DIN 931 bolt and a square knob nut, that is connected to the tube Ø 22 mm, L — 250 mm, a male adapter shaped as a 12 pointed star and tilt joint. The 27.7° main spline joint is equipped with 7.5° adapter washers, a spring and an M5*60 DIN 912 screw. The tilt position and rigidity of the joint is adjusted with a knob with the inserted M5 DIN 934 nut. Each of the mounts comprises a female adapter and is connected to the mounting pad with four 6,3*32 DIN 9200 self-tapping screws. It allows the kit to be fastened at the installation site. The kit also includes a hex wrench. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium, fasteners — of A2 (AISI 304) stainless steel.
| Category: | Borika Fasten |
|---|
Product description:
- The kit includes an Ft300 holder and an FMb mounting system and is designed for installation of a transducer on a transom of inflatable motorboats.
- Allows transducers (sonars) from Lowrance, Raymarine, Garmin and Humminbird and others to be installed at a distance of up to 30 cm from the mounting point.
- To secure the transducer use a 50 mm bolt, adjusted washers with small splines and a square knob nut.
- The design of the holder has a tilt spline joint that adjusts the position of the equipment in 7.5° increments. The knob nut allows the structure to be fixed in the raised position when the transducer is not in use.
- The tube that is the basis of the structure is made of anodized aluminium, which protects the metal against rusting and adverse environmental influences.
- The FMb system, which includes the Fs219 mount and a round pad, is reliable for installation on hard surfaces (aluminum, fiberglass, polyethylene, wood) any BORIKA FASTen® accessories: spinning rod holders, fish finders plates, action camera monopods, tables, rigging, awnings and much more. The advantage of this system is four mounting points. This design is reliable at medium and high loads.
- Fixation is fast and simple: switch the locking mechanism into the UNLOCK position, insert an adapter all the way into the mount, and move the retainer into the LOCK position. You can rotate accessories in 30° increments.
Materials: fiberglass-reinforced polyamide, PVC, anodized aluminium, A2 (AISI 304) stainless steel.
In the package: an Ft300 transducer arm mount, an FMb mounting system, fasteners (4 6,3*32 DIN 9200 self-tapping screws), step-by-step installation guide, a hex wrench.
Tips on using & installation:
- Can be attached on the hard surface of any transom using self-tapping screws from the package or other M6 screws.
- Installation is easy to do using the included step-by-step guide.
- For ease of installation, the package includes a hex wrench, suitable for the fasteners provided in it.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
