SSt223 - Swivel-tilt plate for fish finders with 7″ — 9″ screen diagonal
Technical Details:
Designed for mounting fish finders and other equipment, the distance between the standard mounting holes of which does not exceed 150 mm. The plate area is 164 x 68 mm, its wall is 3 mm thick. The plate is connected together with a swivel-tilt adapter by M6*30 DIN 912 screw and M6 DIN 985 nut. The design allows the plate to be 360° rotated around the axis of the adapter. The 27.7° spline tilt joint is fitted with 7.5° spline washers model Dp230. The tilt position is adjusted and fixed with an M6*55 DIN 933 bolt and a plastic knob with an inserted M6 DIN 934 nut. The design comprises a male adapter shaped as a 12 pointed star, which is used for fixing the structure on the vessel. The main parts are made of fiberglass-reinforced polyamide. Fasteners are made of A2 (AISI 304) stainless steel (except for the M6 DIN 934 brass nut).
| Category: | Borika Fasten |
|---|
Product description:
- This plate is suitable for any vessel and is intended to mount Garmin, Lowrance, Raymarine and Humminbird fish finders with a screen size from 7″ to 9″, maximum distance between mounting points must be up to 95 mm.
- The adapter of the plate is compatible with all BORIKA FASTen® mounting systems and mounts (FMb, FMp224, FMa, Fs218, extended mounts, mounts on the round rails, etc.).
- On the back side of the plate, there are marked thickened mounting points that match the standard mounting holes on the popular models of equipment.
- The assembly is designed in a way that allows the plate along with the installed equipment to be fully rotated around the axis of the adapter, which comes in hand during fishing, when you need to quickly change the position of the screen to avoid sun glare. It also provides tilt settings in 7.5° increments.
- The wall of the plate is 3 mm thick, it is made of fiberglass-reinforced polyamide, which ensures its reliability.
Materials: fiberglass-reinforced polyamide, A2 (AISI 304) stainless steel, brass.
In the package: an SSt223 plate.
Tips on using & installation:
- The base of the fish finder monitor can be fastened to the plate using self-tapping screws in accordance with the step-by-step installation guide. You can use marks to drill holes or make your own holes which will suit your equipment.
- The design can be supplemented with the extenders with 27.7° side splines. This makes it possible to move the equipment away from the installation place on the vessel and makes the process of fishing even more comfortable.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
