Rh101 - Swivel-Tilt Holder with Elastic Clip for Securing of Different Objects Ø from 15 to 50 mm
Technical Details:
Designed for fixing objects with a diameter of from 20 mm to 50 mm. The design consists of a bracket with special external protrusions for fixing the elastic clamp. The bracket is connected to the swivel-tilt adapter using an M6*40 DIN 912 screw and an M6 DIN 985 nut, a tilt joint includes a spring, two Dp230 washers with 7.5° splines, and a male adapter shaped as a 12 pointed star. The holder together with the fixed object can be 360° rotated around the axis. The tilt position is fixed by a hex knob with inserted an M6 DIN 934 nut and an M6*55 DIN 933 bolt. The main parts are made of fiberglass-reinforced polyamide, the elastic clamp is made of polyurethane. The inner part of the bracket is covered with a polyurethane pad. Fasteners — of A2 (AISI 304) stainless steel (except for the M6 DIN 934 brass nut).
| Category: | Borika Fasten |
|---|
Product description:
- The holder of this model can be used to secure on board various items, the coverage of which does not exceed 50 mm: flashlights, oars, spear guns and hunting guns, etc.
- The bracket can be spread up due to the width of the object.
- On the outer part of the bracket there are protrusions for fixing the elastic clamp, which has slots for this purpose.
- The bracket inside is covered with a soft pad that protects the fixed objects from deformation and allows objects of various forms — for example, round and square — to be fixed.
- The upper part of the holder can be turned around its axis. The design also provides a spline tilt connection, so the fixed object can be tilted in 27.7° increments.
- It can be easily fixed in any BORIKA FASTen® mounting system or mount, and can be used on different types of vessel: fishing kayaks, inflatable boats, belly boats, etc. Using transition adapters you can fix this product in the mounting systems from other brands.
Materials: fiberglass-reinforced polyamide, polyurethane, A2 (AISI 304) stainless steel, brass.
In the package: an Rh101 holder.
Tips on using & installation:
- The design can be supplemented with extenders with 27.7° side splines and different types of adjusting and transition washers.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
