Not rated
Mp219 - Glue-On Pad with Radial Base for Installation of Fs218 Track Adapter on the Cyllinder of PVC Watercrafts
Technical Details:
It is designed for installation of an Fs218 T-Track adapter on the surface of an inflatable vessel. The pad has a radius base, which repeats the shape of the cylinder, its gluing area is 110 x 110 mm. The pad is made of PVC and armored with an insert of fiberglass-reinforced polyamide, in the center of which there is a hole for attaching the T-Bolt of Fs218 track adapter. On the sides of the pad there are holes for attaching a strap up to 35 mm wide. The assembly includes a protective plug, made of polyamide.
| Category: | Borika Fasten |
|---|
New
Tip
€317
–97 %
Product description:
- The Mp219 pad is designed to install the Fs218 mount with the bottom T-bolt on the surface of any PVC inflatable vessel (motorboat, RIB, belly boat, float tube, SUP board, or inflatable kayak).
- The design has three advantages, which make the mounting system extremely reliable. The first one is a radius base of the pad, which repeats the shape of a cylinder and thus gives additional strength to the glue joint. The second advantage is an enlarged gluing area (compared to the Mp218 pad). The third one is that the PVC pad is reinforced with an insert, made of polyamide, which provides high strength of the product.
- The side holes serve as two strap holders.
- The assembly also includes a plug that protects the internal part of the pad from water and dirt getting inside when it is not in use.
Materials: fiberglass-reinforced polyamide, PVC.
In the package: an Mp219 pad.
Tips on using & installation:
- The pad is intended to be glued on with a two-component polyurethane adhesive (not included) according to the step-by-step guide.
- The pad is not designed for use with T-Track adapters of other models and from other manufacturers and can be used with BORIKA FASTen® Fs218 mount only.
