LSp1100 - Universal onboard transducer holder in the assembly with the mount
Technical Details:
It has been designed for installation of transducers with different types of mounting. The assembly includes the compact mount. The design consists of two eccentric tubes Ø 20,4 mm: L — 530mm and L — 170 mm, which are connected by the two-component clamp. The assembly also includes a tube (L — 120 мм), which is connected to the structure by a tilt joint with 7.5° splines, and a mount, which is connected to the tubes by a bracket with a swivel joint. The design comprises both male (for fixing on the vessel) and female (for installing the fish finder plate) adapters. There are five square knob nuts for fixation of the selected position of the tilt and swivel joints. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium with powder coating. Fasteners ( three M6 and two M4 DIN 985 nuts, five M6*40 DIN 933 bolts and four M4*20 DIN 912 screws, M6*25, M6*50 and M5*50 DIN 912 screws) and a spring — of А2 (AISI 304) stainless steel (except for five M6 DIN 985 brass nuts).
| Category: | Borika Fasten |
|---|
Product description:
- This model is universal and allows almost any transducer to be securely mounted at different vessels and used to maximum effect.
- The package includes a set of transducer fastenings: the fastening with a 50 mm bolt, radius washers and a knob nut, the expanding fastening with swivel brackets, radius washers and “fins”, and a special fastening for Garmin Panoptix LiveScope™.
- This model of the holder includes a compact mount, where any BORIKA FASTen® plate for the fish finder monitor can be fixed. Using the conversion adapters you can also fix accessories of other brands ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).
- Fixing of the plate is carried out on the ROLL & LOCK principle: the mount body turns counterclockwise, which moves the locking mechanism to the open position, then the adapter is pushed into the mount all the way in and the mount turns clockwise, clamping teeth of the accessory adapter.
- The design allows the transducer arm mount to be adjusted to a comfortable configuration during use and fix it compactly in the raised position. It can be easily adjusted in width of board and in the immersion depth (up to 1 m).
- The design provides a handle that allows the user to adjust the angle of view with 360° rotation, which is important for the Garmin Panoptix LiveScope™ transducer with bottom and side scan functions and real-time fish indication system.
- The adapter of the arm mount is compatible with all BORIKA FASTen® mounting systems. Using the conversion adapters you can also fix it in mounting systems from other manufacturers ( SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).
Materials: fiberglass-reinforced polyamide, anodized aluminium with powder coating, polyurethane, A2 (AISI 304) stainless steel, brass.
In the package: an LSp1100 transducer arm mount, a set of transducer fastenings.
Tips on using & installation:
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
