FTp601 - Mounting kit fot installation of fish finder up to 7″ and transducer on a PVC boat (Ft601 + FMp224)
Technical Details:
It has been designed for installation of the fish finder on inflatables. The assembly includes the Ft601 kit and the FMp224 mounting system. The swivel plate (106 х 98 mm) is connected with the tube (Ø 20,4 mm, L — 170 mm), a two-element clamp and two tubes Ø 20,4 mm (L — 400 mm and 120 mm). The square knob nuts fix and adjust the chosen position of the design. The transducer mount includes two washers which are made of polyurethane, an M6*50 DIN 931 bolt and a knob nut. The assembly includes the fasteners: three M6*35 DIN 933 bolts, DIN 912 screws (M5*50, M4*20 — 2 pcs., M6*20 — 5 pcs., M6*60) and M4 DIN 985 (2 pcs.), an M6 DIN 985, M5 and M6 DIN 934 nuts. The adhesive area of the mounting pad — 110 х 110 mm. It is made of PVC and reinforced inside with a polyamide washer. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium with powder coating. The fasteners are made of А2 (AISI 304) stainless steel (except for M5 and M6 DIN 934 brass nuts).
| Category: | Borika Fasten |
|---|
Product description:
- This set offers a complete solution for mounting a fish finder and a transducer on the side of an inflatable boat. The design comprises a plate for a small fish finder monitor (up to 7″) and an arm mount, suitable for most popular transducers of Lowrance, Raymarine, Garmin, Humminbird and other brands.
- The transducer mount is equipped with the adapter, which allows the structure to be fixed into any BORIKA FASTen® system. After use, the entire set can easily be removed for transportation without having to dismantle the equipment.
- It can be easily adjusted both in depth (maximum is about 40 cm) and in width of the board (for boards up to 30 cm in diameter) by changing the position of the clamp joints.
- The transducer includes a handle to change the scanning angle.
- On the back side of the plate, there are marked thickened mounting points that match the standard mounting holes on the popular models of equipment.
- The assembly is designed in a way that allows the plate along with the installed equipment to be fully rotated around the axis of the adapter, which comes in hand during fishing, when you need to quickly change the position of the screen to avoid sun glare.
- The wall of the plate is 3 mm thick, it is made of fiberglass-reinforced polyamide, which ensures its reliability.
- To secure the transducer use a 50 mm bolt, adjusted washers with small splines and a square knob nut.
- The FMp224 includes an Fs219 accessory mount and a PV mounting pad 110 x 110 mm, reinforced with a polyamide washer, which is intended to be glued to the surface of the cylinder. The mount is fastened to the pad with four screws, which makes the structure strong and reliable.
- The mount included in the assembly is compatible with all BORIKA FASTen® accessories and with conversion adapters you can fix in it some accessories and devices from other brands (SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, carp fishing tackles, etc.).
- Fixation of the accessory is fast and simple: switch the locking mechanism into the UNLOCK position, insert an adapter all the way into the mount, and move the retainer into the LOCK position. You can rotate accessories in 30° increments.
Materials: fiberglass-reinforced polyamide, PVC, anodized aluminium, A2 (AISI 304) stainless steel, brass.
In the package: an Ft601 system, an FMp224 mounting system a step-by-step installation guide.
Tips on using & installation:
- The mounting kit is securely glued to the surface of the PVC cylinder with two-component polyurethane adhesive according to the step-by-step instructions and can be used for its intended purpose the day after installation.
- To fix accessories with paired adapters (trolling stands, round rails, tables, ladders), install FMp224 systems with a distance between the centers of the mounts, a multiple of 305 mm (305 mm, 610 mm, etc.).
- The base of the fish finder monitor can be fastened to the plate using self-tapping screws in accordance with the step-by-step installation guide. You can use marks to drill holes or make your own holes which will suit your equipment.
- The transducer’s tubes fold up compactly during transportation.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
