FTf601 - Universal onboard transducer holder in the assembly with the mount
Technical Details:
It has been designed for installation of the fish finder and a sonar on the PVC boat. The design comprises the mount, which allows the plate for fish finder to be installed, the tube (Ø 20,4 mm, L — 170, 400 и 120 mm), joints, brackets, two-element collars, square knob nuts, a male adapter shaped as a 12 pointed star. The package includes a set of fastenings for different types of transducers: side fastening with an M6*50 DIN 931 bolt, knob nut and two polyurethane washers, covering fastening of two swivel brackets and radius washers with “fins”, and a special adjustable fastening for Garmin Panoptix LiveScope. The fasteners: three M6*35 DIN 933 bolts, DIN 912 screws (M5*50, M4*20 — 2 pcs., M6*20, M6*50), M4 DIN 985 (2 pcs.), M4 and M6 DIN 985, M5 and M6 DIN 934 nuts. The main parts are made of fiberglass-reinforced polyamide. The tube — of anodized aluminium with powder coating. The fasteners — of А2 grade (AISI 304) stainless steel (except for M5 and M6 DIN 934 brass nuts).
| Category: | Borika Fasten |
|---|
Product description:
- The kit has been designed for installation of the fish finder equipment on inflatable boats. It includes the mount for fixing the plate for fish finder monitor and the transducer arm mount with the set of fastenings for transducers from Lowrance, Raymarine, Garmin, Humminbird and other brands.
- The design can be easily adjusted both in depth (maximum is about 40 cm) and in width of the board (for boards up to 30 cm in diameter) by changing the position of the clamp joints.
- The transducer also includes a handle to change the scanning angle and make the accessory more convenient to use.
- Includes a compact mount, where any BORIKA FASTen® plate for the fish finder monitor can be fixed. Using the conversion adapters you can also fix accessories of other brands (SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, etc.).
- Fixing of the plate is carried out on the ROLL & LOCK principle: the mount body turns counterclockwise, which moves the locking mechanism to the open position, then the adapter is pushed into the mount all the way in and the mount turns clockwise, clamping teeth of the accessory adapter.
- The transducer holder includes three types of fastening: the expanding fastening with two swivel brackets and “fins”, which protects the transducer from mechanical damage, the side fastening with 50 mm bolt, washers and a knob nut and the special fastening for Garmin Panoptix LiveScope™.
Materials: fiberglass-reinforced polyamide, anodized aluminium, polyurethane, A2 (AISI 304) stainless steel, brass.
In the package: an FTf601 transducer arm mount, a set of transducer fastenings.
Tips on using & installation:
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
