Ft601 - Mounting kit fot installation of fish finder up to 7″ and transducer along the side
Technical Details:
It has been designed for installation of the fish finder on the different vessels. The assembly includes the Sl223 plate and the transducer mount. The plate (106 х 98 mm, the wall thickness is 3 mm) is equipped with a male adapter shaped as a 12 pointed star which rotates 360°. The plate is connected to the tube (Ø 20,4 mm, L — 170 mm) which is attached to two other tubes Ø 20,4 mm (L — 400 and 120 mm), which are joined to each other with a clamp. The square knob nuts fix and adjust the chosen position of the design. The transducer mount is equipped with two washers that are made of polyurethane, an M6*50 DIN 931 bolt and a knob nut. The assembly includes the fasteners: three M6*35 DIN 933 bolts, DIN 912 screws (M5*50, M4*20 — 2 pcs., M6*20, M6*60) and M4 DIN 985 (2 pcs.), M6 DIN 985, M5 and M6 DIN 934 nuts. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium. The fasteners are made of А2 (AISI 304) stainless steel (except for M5 and M6 DIN 934 brass nuts).
| Category: | Borika Fasten |
|---|
Product description:
- This set offers a complete solution for mounting a fish finder and a transducer on the side of an inflatable boat. The design comprises a plate for a small fish finder monitor (up to 7″) and an arm mount, suitable for most popular transducers of Lowrance, Raymarine, Garmin, Humminbird and other brands.
- The transducer mount is equipped with the adapter, which allows the structure to be fixed into any BORIKA FASTen® system. After use, the entire set can easily be removed for transportation without having to dismantle the equipment.
- It can be easily adjusted both in depth (maximum is about 40 cm) and in width of the board (for boards up to 30 cm in diameter) by changing the position of the clamp joints.
- The transducer includes a handle to change the scanning angle.
- On the back side of the plate, there are marked thickened mounting points that match the standard mounting holes on the popular models of equipment.
- The assembly is designed in a way that allows the plate along with the installed equipment to be fully rotated around the axis of the adapter, which comes in hand during fishing, when you need to quickly change the position of the screen to avoid sun glare.
- The wall of the plate is 3 mm thick, it is made of fiberglass-reinforced polyamide, which ensures its reliability.
- To secure the transducer use a 50 mm bolt, adjusted washers with small splines and a square knob nut.
Materials: fiberglass-reinforced polyamide, anodized aluminium, A2 (AISI 304) stainless steel, brass.
In the package: an Ft601 system.
Tips on using & installation:
- The base of the fish finder monitor can be fastened to the plate using self-tapping screws in accordance with the step-by-step installation guide. You can use marks to drill holes or make your own holes which will suit your equipment.
- The transducer’s tubes fold up compactly during transportation.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
