Ft460 - Mounting kit for installation of fish finder with 7″ — 9″ screen and transducer along the side
Technical Details:
The kit has been designed for installation of a fish finder monitor and a transducer on PVC boats. The assembly includes the Ss223 plate for fish finder and telescopic transducer holder for mounting the equipment at a depth of 295 to 490 mm from the installation point. The plate (164 х 68 mm) has a male adapter shaped as a 12 pointed star and is connected with the transducer mount by a swivel bracket. Rotates 360° around the adapter axis. The transducer’s design consists of the telescopic tubes (Ø 20,4 mm, L — 170 mm; Ø 20,4 mm L — 240 mm; Ø 16,2 mm, L — 220 mm) and covering transducer mount that comprises the swivel brackets and radius washers. The assembly includes the fasteners: DIN 912 screws (M6*30, M6*60, M5*50 and M5*40) and M6 and M5 DIN 985 self-locking nuts. The main parts are made of fiberglass-reinforced polyamide. The tube is made of anodized aluminium with powder coating. The fasteners are made of А2 (AISI 304) stainless steel.
| Category: | Borika Fasten |
|---|
Product description:
- This set offers a complete solution for mounting a fish finder and a transducer on the side of an inflatable boat. The design comprises a plate for a small fish finder monitor (from 7″ to 9″) and an arm mount, suitable for most popular transducers of Lowrance, Raymarine, Garmin, Humminbird and other brands.
- The transducer mount is equipped with the adapter, which allows the structure to be fixed into any BORIKA FASTen® system. After use, the entire set can easily be removed for transportation without having to dismantle the equipment.
- The user can adjust the system to the width of the boat side, moving the clamp, which connects the plate and the arm.
- On the back side of the plate, there are marked thickened mounting points that match the standard mounting holes on the popular models of equipment.
- The assembly is designed in a way that allows the plate along with the installed equipment to be fully rotated around the axis of the adapter, which comes in hand during fishing, when you need to quickly change the position of the screen to avoid sun glare.
- The wall of the plate is 3 mm thick, it is made of fiberglass-reinforced polyamide, which ensures its reliability.
- The transducer holder has a two-stage telescopic design, the maximum distance between the transducer and the place of its installation on the boat is about 50 cm and the minimum distance is about 30 cm.
- The joint between the tubes is fitted with a locking system that automatically activates when the holder is unfolded. To fold it down — just press the button on the tube joint.
- The accessory is equipped with the covering fastening system that is suitable for most popular transducers. Two swivel brackets and the set of radius washers allow the coverage to be adjusted, and additional rigid “fins” of this system help to protect the transducer from mechanical damage.
Materials: fiberglass-reinforced polyamide, anodized aluminium, polyurethane, A2 (AISI 304) stainless steel, brass.
In the package: an Ft460 system.
Tips on using & installation:
- The base of the fish finder monitor can be fastened to the plate using self-tapping screws in accordance with the step-by-step installation guide. You can use marks to drill holes or make your own holes which will suit your equipment.
- The transducer’s tubes fold up compactly during transportation.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
