ARr003 - Swivel-Tilt Anchor Roller with a Guide Ring for Halyard
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with 27.7° side splines, a free-rotating roller and a D-shaped guide ring, as well as a male adapter shaped as a 12 pointed star connected to the roller body by tilt joint equipped with a spring and Dp230 washers with 7.5° splines. The tilt position is fixed using a M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. Fits for a halyard Ø up to 10 mm. The assembly also includes fasteners: two M6*55 DIN 912 screws, and two M6 DIN 985 self-locking nuts. The adapter is equipped with an O-ring. The main parts are made of fiberglass-reinforced polyamide. Fasteners and the spring are made of A2 (AISI 304) stainless steel (except for an M6 DIN 934 brass nut).
Category: | Borika Fasten |
---|
Product description:
- The roller of this model is intended for fast lowering and hoisting anchors weighing up to 8 kg. It can be used both separately and in a pair with holders equipped with a locking system (Al002, Al003, etc.), ensuring free sliding of the anchor halyard.
- The tilt design is convenient for use on inflatable boats: the roller holds the anchor overboard in such a way that the rope does not touch the surface of the inflatable cylinder during lowering and hoisting.
- The tilt position of the roller can be 180° adjustable in 7.5° increments.
- The roller rotates easily and fits for halyards with a diameter of up to 10 mm.
- The D-shaped guide ring allows for choosing and holding the necessary direction of the anchor rope, preventing it from slipping and tangling.
- The accessory can be fixed in any BORIKA FASTen® mounting system designed for medium and high loads.
Materials: fiberglass-reinforced polyamide, A2 (AISI 304) stainless steel, brass.
In the package: an ARr003 anchor roller.
Tips on using & installation:
- The spline joint also allows for creating various assemblies: for example, connecting the roller with an anchor holder, an As222 reinforced male adapter, and an extender.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.