Al003 - Swivel-Tilt Anchor Lock with Automatic Stopper
Technical details:
It is intended for lowering and hoisting anchors weighing up to 8 kg. The design consists of a cast body with 27.7° side splines, a stopper with a cord for releasing a rope or belt, a spring, a roller, a male adapter shaped as a 12 pointed star, which is connected to the holder body by tilt joint equipped with Dp230 7.5° spline washers. The tilt position is fixed using an M6*50 DIN 931 bolt and a hex knob with an inserted M6 DIN 934 nut. Fits for a halyard Ø up to 10 mm and a belt up to 35 mm wide and up to 2.5 mm thick. The assembly also includes fasteners: two M6*55 DIN 912 screws, and two M6 DIN 985 self-locking nuts. The adapter is equipped with an O-ring. The main parts are made of fiberglass-reinforced polyamide. Fasteners and the spring are made of A2 (AISI 304) stainless steel (except for an M6 DIN 934 brass nut).
| Category: | Borika Fasten |
|---|
Product description:
- Is suitable for holding an anchor weighing up to 8 kg on various types of vessel. Fits for a halyard up to 10 mm and belts up to 35 mm wide and up to 2.5 mm thick.
- The tilt design is convenient for use on inflatable boats: the holder fixes the anchor overboard in such a way that the rope does not touch the surface of the inflatable cylinder during lowering and hoisting.
- The tilt position of the holder can be 180° adjustable in 7.5° increments.
- The spring-loaded locking system automatically fixes the anchor: just pull the rope while hoisting the anchor.
- For easy lowering, a releasing system is provided: just pull the cord on the holder body.
- A convenient roller makes it easier to slide a belt or halyard.
- The holder can be installed in any BORIKA FASTen® mounting system, designed for medium and high loads.
Materials: fiberglass-reinforced polyamide, A2 (AISI 304) stainless steel.
In the package: an Al003 anchor holder.
Tips on using & installation:
- By attaching a longer rope to the releasing cord, the user gets the opportunity to release the anchor halyard while being at a distance from the holder.
- The spline joint also allows for creating various assemblies: for example, connecting the holder with an anchor roller, an As222 reinforced male adapter, and an extender.
- To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.
